Adjust the camera crane properly

Adjust the camera crane properly

With the rapid development of film and television equipment, camera crane has become an indispensable film and television auxiliary equipment for photographers, whether in film and television series or MV, it is a good assistant in shooting. However, many novices in the beginning of the use of photography will inevitably appear in one way or another, such as the use of adjustment problems. The following is a brief introduction to how to adjust the rocker arm correctly.

First of all, release the motor fixing screws and disconnect the motor gear from the bracket plate gear.

Move the front and back position of the camera bracket on the bracket frame to keep the camera in balance with its position without bowing or looking up. Turn the camera 180 degrees, and the bottom of the pallet is facing up, and the camera can still remain stationary.

Adjust the position of the camera on the bracket so that the camera can remain stationary when facing down and up.

The rotating camera can remain stationary at any 360 degrees. If you can not remain static, repeat 2 or 3 adjustments. Until the camera can remain stationary at any degree.

The camera needs to be readjusted. Because the center of gravity of different cameras is different.

Please feel free to give your inquiry in the form below.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :