Industry news

Home>News > Industry news

How to correct the camera crane?

How to correct the camera crane?

With the rapid development of film and television equipment, the camera rocker has become an indispensable video assistant for the cameraman, and it is a good helper for both the film TV series and the MV. However, many novices in the beginning of the use of photography will inevitably appear in one way or another, such as the use of adjustment problems. The following is a brief introduction to how to adjust the rocker arm correctly.

First of all, release the motor fixing screws and disconnect the motor gear from the bracket plate gear.

The front and rear positions of the mobile camera pallet on the pallet support a balance between the camera and its position. Turn the camera 180 degrees, and the bottom of the pallet is facing up, and the camera can still remain stationary.

Adjust the camera's position up and down on the bracket so that the camera can remain stationary when the head is down and up.

The rotating camera can remain stationary at any 360 degrees. If you can't stay at rest, repeat 2 or 3 adjustments. Until the camera can remain stationary at any degree.

The replacement camera needs to be readjusted. Because the center of gravity of different cameras is different.

Please feel free to give your inquiry in the form below.
* Subject :
* Email :
  • Name :

  • Phone :

  • *Message :